![3-D Oscillating Manifold System](http://vortexpartswashers.com/wp-content/uploads/2015/01/3D_oscillate.jpg)
3-D Oscillating Manifold System
Combination of oscillating manifold, and stationary manifolds to clean your parts with 360 degree’s of coverage.
![Debris Containment System](http://vortexpartswashers.com/wp-content/uploads/2015/01/Vortex-Parts-Washer-Debris-Containment-Slope-Floor-To-Drain-copy.jpg)
Debris Containment System
Traps debris and sludge through removable stainless steel baskets prior to returning over main wash reservoir wall.
![Midlevel Removable Spray Bar](http://vortexpartswashers.com/wp-content/uploads/2015/01/SprayBar.jpg)
Midlevel Removable Spray Bar
Swing away Mid level spray manifold for increased pressure on reduced height loads.
![Clamshell Style V-Notched Door for Safety](http://vortexpartswashers.com/wp-content/uploads/2015/01/ClamshellDoors.jpg)
Clamshell Style V-Notched Door for Safety
Safest design for operators loading and offloading parts using an overhead crane or forklift.
![Rotating Turntable: Gear Driven, Breaker Protected](http://vortexpartswashers.com/wp-content/uploads/2015/01/Gear-Driven-Turntable-Vortex-Parts-Washer.jpg)
Rotating Turntable: Gear Driven, Breaker Protected
Engineered to exceed service intervals, and failures associated with tire drive and chain driven systems.
![Constructed of Heavy 7 Gauge Mild Steel](http://vortexpartswashers.com/wp-content/uploads/2015/01/heavy_steel.jpg)
Constructed of Heavy 7 Gauge Mild Steel
Structural integrity is engineered for 25 years of operation. We also offer optional 1/4” construction for the heaviest of loads.
![Auto Water Fill and Low Water Shut Off Protection](http://vortexpartswashers.com/wp-content/uploads/2015/01/AutoWater.jpg)
Auto Water Fill and Low Water Shut Off Protection
Automatically maintains consistent water level within 1.5”, also turns off heaters in case of unsafe water level.
![Turntable Jog](http://vortexpartswashers.com/wp-content/uploads/2015/01/turntable_jog.jpg)
Turntable Jog
Push button turntable jog rotates table for easy positioning when loading and offloading parts.
![Door Safety Interlock](http://vortexpartswashers.com/wp-content/uploads/2015/01/interlock.jpg)
Door Safety Interlock
To Ensure safe operation, all Vortex Parts Washers are equipped with safety interlock switches. Washer pumps will not operate if door is open.
![Wash Cycle Timer with Automatic Reset](http://vortexpartswashers.com/wp-content/uploads/2015/01/timer-copy.jpg)
Wash Cycle Timer with Automatic Reset
Several options to choose from, including Eagle style programmable timer. Standard 60 minute timer.
![Emergency Stop Button](http://vortexpartswashers.com/wp-content/uploads/2015/01/emergency_stop1.jpg)
Emergency Stop Button
Stops all mechanical operation, table drive and pumps.
![2 Channel, 24/7 Programmable Timer](http://vortexpartswashers.com/wp-content/uploads/2011/07/Vortex-Parts-Washer-Two-Channel-Timer.jpg)
2 Channel, 24/7 Programmable Timer
Controls heat system and optional oil skimmer. Pre-heats tank prior to shift, runs oil skimmer during off hours.
![Adjustable Temperature Control](http://vortexpartswashers.com/wp-content/uploads/2015/01/TempControl.jpg)
Adjustable Temperature Control
Thermostat controls are microprocessor-based, panel mounted with digital readout.