Rolling Mills Parts Washer

Hot and Cold Rolling and other industrial metalworking

The Vortex Rolling Mills Parts Washer is designed to completely clean the crevasses, pockets, and surface areas of the equipment used in the metalworking industry. The performance of single or dual high horsepower pumps ensure that all parts are thoroughly cleaned throughout.


 

Our Technology

Design & Safety Features

 

  • Wash Cycle Timer with Automatic Reset
  • Emergency Stop Button
  • Auto water fill and Low water Shut Off protection (protects pumps and heat system)
  • 2 Channel, 24 hour 7 day programmable timer
  • Adjustable Temperature Control
  • Rear Mounted Wash Pump Strainers
  • 208, 230, 460 volt – 60 Hz 3 phase with 120V controls
  • Solvent Free Operation, EPA – Eco-friendly

 

build-on

Technical Specifications

Work Area Dimensions Standard Metric
Turntable Diameter 108” 2,743 mm
Work Height 72″ 1,828 mm
Table Load Capacity 20,000 lb. 9,071 kg
Heavy Duty Capacity 65,000 lb. 29,483 kg

 

Unit Dimensions: Standard Metric
Width 127” 3,225 mm
Height 116” 2,946 mm
Depth 150” 3,810 mm
Reservoir/Tank 2,200 gal 8,327 l

 

Heating System
Heating Element Size 108 kW 108 kW
Operating Temperature 140 – 190 F 60 – 87 C
Initial Heat-Up Time XXXXX XXXXX
Gas / Propane 2,000,000 BTU/hr

 

Pump System & Performance Dual 40 HP Dual 40 HP
Total System Flow 502 gpm 1,900 l/min
System Pressure 152 psi 10 bar

 

3-D Oscillation Manifold or Multiplex Oscillating Spray Manifold
Type of Nozzle V-Jet
Nozzle Material Stainless Steel
Nozzle Spray Pattern 40 degrees

 

Electrical
Wiring Standard UL 73 / NFPA 79
Motor Starters Across the line
Short Circuit Protection Standard
Overload Protection Standard
Motor Type TEFC (Totally Enclosed Fan Cooled)
Motor Rating Continuous Duty
Motor Enclosures NEMA 12
Electrical Enclosures NEMA 12
Wiring Conduit Both Flexible nonmetallic and metallic
Conduit Type Liquid tight NEMA 12

Additional Vortex Options

  • Gas Heat Burner Systems
  • Steam Heat System
  • Part Dry Blow-Off Systems
  • Center Manifold (Oscillating)
  • Chemical Siphoning Injection System
  • Digital pH Display
  • Fixtures and Baskets
  • Filtration Systems
  • Marine Door Clean-out Hatch
  • Coalescing Oil Removal System
  • Reservoir Sludge Scrape-Out System
  • Vortex Hydro Blast Spray Wand
  • 575 Volt – 60Hz 3 Phase
  • 50Hz International Electrical Requirements