This machine is equipped with a powerful 30hp pump, and a rotating 60” x 48” turntable work area. This specific model is popular for larger diesel engines, transmissions and components, and AC electric motor rebuilding. Our Grundfos 30hp pump produces 301 gpm and 134 psi to easily remove dirt, grime, oils, soot, and carbon from every possible angle with our 3-D Oscillating and Multiplex Oscillating Manifolds. We at Vortex understand the heavy demands of parts cleaning and aim to meet specific needs by tailoring each model’s features for each application.

 


 

Our Technology

Design & Safety Features

 

  • Wash Cycle Timer with Automatic Reset
  • Emergency Stop Button
  • Auto water fill and Low water Shut Off protection (protects pumps and heat system)
  • 2 Channel, 24 hour 7 day programmable timer
  • Adjustable Temperature Control
  • Rear Mounted Wash Pump Strainers
  • 208, 230, 460 volt – 60 Hz 3 phase with 120V controls
  • Solvent Free Operation, EPA – Eco-friendly

 

Gearbox Parts Washer

Technical Specifications

Work Area Dimensions Standard Metric
Turntable Diameter 60” 1,524 mm
Work Height 48” 1,219 mm
Table Load Capacity 5,000 lb. 2,267 kg
Heavy Duty Capacity 25,000 lb. 11,339 kg

 

Unit Dimensions: Standard Metric
Width 79” 2,006 mm
Height 88.5” 2,247 mm
Depth 91” 2,311 mm
Reservoir/Tank 450 gal 1,703 l.

 

Heating System
Heating Element Size 72 kW 72 kW
Operating Temperature 140 – 190 F 60 – 87 C
Initial Heat-Up Time 45 – 90 min 45 – 90 min
Gas / Propane 400,000 BTU/hr

 

Pump System & Performance 30 HP 30 HP
Total System Flow 343 gpm 1,298 l/min
System Pressure 121 psi 8 bar

 

3-D Oscillation Manifold or Multiplex Oscillating Spray Manifold
Type of Nozzle V-Jet
Nozzle Material Stainless Steel
Nozzle Spray Pattern 40 degrees

 

Electrical
Wiring Standard UL 73 / NFPA 79
Motor Starters Across the line
Short Circuit Protection Standard
Overload Protection Standard
Motor Type TEFC (Totally Enclosed Fan Cooled)
Motor Rating Continuous Duty
Motor Enclosures NEMA 12
Electrical Enclosures NEMA 12
Wiring Conduit Both Flexible nonmetallic and metallic
Conduit Type Liquid tight NEMA 12

Additional Vortex Options

  • Gas Heat Burner Systems
  • Steam Heat System
  • Part Dry Blow-Off Systems
  • Center Manifold (Oscillating)
  • Chemical Siphoning Injection System
  • Digital pH Display
  • Fixtures and Baskets
  • Filtration Systems
  • Marine Door Clean-out Hatch
  • Coalescing Oil Removal System
  • Reservoir Sludge Scrape-Out System
  • Vortex Hydro Blast Spray Wand
  • 575 Volt – 60Hz 3 Phase
  • 50Hz International Electrical Requirements